AD-150-24-F1M1

0/1-10V Dimmable Driver

AD-150-24-F1M1

(150W 24V)

0/1-10V CV DRIVER

LED Intelligent Driver Dimming interface: 0-10V (1-10V/10VPWM/resistor), Push Dim. Build-in high performance MCU, dimming curve can be customized. Dimming range from 0-100%, LED start at 0.1% possible. Power factor > 0.99, Efficiency > 93%. Short circuit / Over-temperature / Over load / Over voltage protection. Compliant with Safety Extra Low Voltage standard. Suitable for indoor environments.

 
Dimming Interface:
0-10V (1-10V/10VPWM/Resistor), Push Dim
Input Voltage Range:
100-240Vac ±10%
Frequency:
50/60Hz
Input Current:
115Vac≤1.95A, 230Vac≤0.8A
Power Factor:
PF>0.99/115Vac , PF>0.95/230Vac, at full load
THD:
<5% at 115Vac, <8% at 230Vac (full load)
Efficiency:
>93%
Inrush Current(typ.):
Cold start 60A at 230Vac
Control surge capability:
L-N: 1kV, L/N-Ground: 2kV
Leakage Current:
I/P-O/P: <0.5mA/230Vac, I/P-GND: <0.75mA/230Vac
Output Current:
Max. 6.25A
Output Voltage:
24Vdc
Output Voltage Range:
24Vdc ±0.5Vdc
Ripple & Noise:
≤200mV
Output Power:
Max. 150W
Output Power Range:
1~150W
Overload Power Limitation:
≥102%~125%
Dimming Range:
0~100%, LED start at 0.1% possible.
PWM Frequency:
≤2Khz
Working Temperature.:
tc: 80°C ta: -30°C ~ 60°C
Working Humidity:
20 ~ 95%RH, non-condensing
Storage Temp., Humidity:
-40 ~ 80°C, 10~95%RH
Temp. Coefficient:
±0.03%/°C(0-50°C)
Vibration:
10~500Hz, 2G 12 min./1cycle, period for 72 min. each along X, Y, Z axes